Bitumen - Rubber Based Waterproofing Products
|Country of manufacture||Turkey|
It is a waterproofing material ready to use obtained by mixing water and bitumen by using special methods.
After the evaporation of the structural water, it makes a waterproof layer on the applied surface.
B PR 101 is used as a priming coat before the application of all brands of bitumen membranes. Thanks to the superior sticking property, it provides a stronger and no cavity-surface sticking for the bitumen membranes applied on it. The cavities in the base can be corrected or a protective layer can be established on the insulation part, with alum obtained by mixing B PR 101 and sieved thin sand and some cement and applying with a trowel.
For the application of the gluing of the parquets with hot bitumen, it is applied on alum as a primary coating. In order to disassemble the constructional moulds it is applied to constructional moulds and a plain surface is obtained and prevents the harm effect of the concrete water to the moulds.
|Turkish Standard No.||: 113|
|Colour||: Brown in the package, black after drying|
|Thickness||: Concentrated Syrup|
|Density||: 0.98 g/cm3|
|Softening Temperature||: + 70°C|
|Suitable Application Temperature||: Between (+5°C) - (+35°C)|
|Solid content||: 46 %|
|Drying Duration||: Touching: 1 Hour|
|: Full Drying: 5-6 Hours|
|: Test: 8 Days|
It is economical.
It can be used in closed areas for not containing toxic and flammable substances
After the evaporation of the structural water, establishes a waterproof layer not redissolving with water.
The application surface should be without dust, rust, dirt, grease and oil and the loose parts should be scrapped out.
The sharp points or horizontal-vertical joint places subject to cracking should be rounded.
The large pores and the cracks should be filled with REPAMERK repair mortar or PH 55 for corners.
B PR 101 is cold applicable. After mixing with the water with 20% percentage, it is applied by bitumen brush, roller or gun. It dries within about 4-5 hours depending on the weather conditions. It should not apply in rainy days or with the temperatures lower than +5°C. A new layer should not be applied before the previous one has fully dried.
Cleaning Of The Tools
The cleaning of the tools is accomplished with soapy water just after the usage but with industrial type of solvents after it dried.
0,30 –400 g/m2 for every layer
Net 17 kg Metal Tin
Net 200 kg Barrel
Storage and Shelf Life
2 year in original packaging. Storage below 35°C.
B PR 102
B PR 102 is a ready to use single component liquid bitumen solution without filler.
After application the solvents evaporate and B PR 102 becomes a strong layer against water.
B PR 102 can be applied against moisture and leakages at balconies, water channels, wet surfaces like bathrooms, kitchens, WC floors and pools. In higher-pressure applications, B PR 102 can be applied with glass fiber or waterproofing fabric reinforcement as well. Roofs, terraces and foundations. Building exterior surfaces. As primer for bituminous membranes applied at metal surfaces. As corrosion prevention for metal surfaces.
|Form||: Viscous liquid|
|Gravity||: 0,96 g/cm3|
|Softening point||: +65°C|
|Application temperature||: +5°C to +35°C|
|Application method||: Brush, spraying, roll, or dipping|
|Solid content||: %65|
|Crusting time||: Approx. 2 hours|
- B PR 102 ensures a seamless insulation on vertical or horizontal surfaces where it is applied.
- Ready to use.
- Cold applicable.
- Dries fast.
- It is easily applicable and very economic.
- No heating or thinning is required.
- It is highly adhesive on most building materials and metals.
Surface must be dry and clean before application. Any loose pieces, dust, oil, grease should be removed. Sharp tips and horizontal/vertical joints which are suitable cracking, must be chamfered. Big pores and cracks must be filled with REPAMERK repair mortar.
B PR 102 shall be applied to that surface of the wall, which will be in contact with water (positive pressure). It is ready to use. No heating or thinning is required. Although B PR 102 is a fast drying type of solution (1 hour approximately), every next layer should better be applied next day. To obtain higher resistance or in case of cracks fiberglass or nonwoven polyester can be used. For exposed and non-walking roofs, ALUCOAT shall be applied as topcoat, so a solar protection and aesthetic look may be obtained.
Cleaning Of The Tools
After application, tools can be cleaned with solvents.
500 g/m2 for every layer
Net 17 kg metal tin
Net 200 kg barrels
Storage and Shelf Life
2 year in original packaging. Storage below 35°C